Bathrooms
Bathroom leakage: why the ceiling below gets damp
RPC Engineering Team5 min read
A stain on the ceiling below a bathroom is one of the most common leaks in homes across Erode and Coimbatore. The tiles above usually look perfect, which is exactly why the problem lasts so long.
Where the water escapes
- Through cement grout between tiles, which absorbs water and cracks with time
- Around the floor trap and pipe openings, where the slab was broken for plumbing
- At the junction of wall and floor, and up the wall behind the shower
- From a leaking concealed pipe, which no amount of waterproofing can stop
How it is fixed properly
The first job is to tell waterproofing failure apart from plumbing failure. A pressure test on the supply lines and a pond test on the floor separate the two.
If the waterproofing has gone, the tiles come up. The sunken slab is cleaned, every pipe opening gets a sealing collar, and two coats go on the floor and at least 300 mm up the walls, full height inside the shower. The floor is flooded for 48 hours, and only then retiled with epoxy grout.
Can it be done without breaking tiles?
Sometimes. Where water is only getting through the grout, raking it out and regrouting with epoxy can stop it, and injection helps in particular cases. But once water is sitting in the sunken slab, only opening it up lasts.
This article is general guidance. Every site is different, so speak to a qualified engineer before making decisions about your project.



