Skip to content

Waterproofing services

Bathroom waterproofing services

Bathroom waterproofing services from RPC Constructions stop water escaping from your bathroom into the walls and the room below, and in many cases we do it without breaking the tiles. An engineer traces where the water gets out, through the tile joints, the floor-wall corner, the floor trap, a pipe or the sunken slab, and our own crew seals that point with one named system.

We work on houses, flats and hostels across Erode, Coimbatore, Krishnagiri and Hosur, on old bathrooms that already leak and on new ones before they are tiled. We also supply the Fosroc, Sika and Berger products we use, so you can see exactly what goes under your floor.

Flexible waterproof membrane laid on a bathroom floor and turned up the walls before tiling
  • Freeinspection and leak trace by an engineer
  • Tiles staywhen the leak is at the joints, not the slab
  • Flood testbefore every bathroom is handed back

Know the signs

Signs your bathroom needs waterproofing

A bathroom leak rarely shows in the bathroom. Look at the ceiling below and the walls next door.

  • Damp patch on the ceiling below

    A stain on the ceiling of the room or flat under the bathroom, often right below the floor trap, the toilet or the shower.

  • Damp skirting on the next wall

    Bubbling paint or a damp line on the bedroom or hall wall that shares a side with the bathroom.

  • Dark, cracked or missing grout

    Open tile joints let shower water straight into the bed below the tiles, where it spreads out of sight.

  • Hollow-sounding tiles

    Tap the floor tiles. A hollow sound means the bed has lost its bond, usually because water is sitting under it.

  • Water around the trap or toilet base

    Gaps around the floor trap, the toilet pan or a pipe collar are among the most common bathroom leak points.

Methods

Bathroom waterproofing methods we use

The repair depends on where the water escapes and how sound the tiles are.

MethodBest forTiles removed?When we choose it
Epoxy re-grouting and joint sealingLeaks through worn or cracked tile jointsNoThe tiles are well bonded and the bed below is not soaked
Corner, trap and pipe-collar sealingLeaks at the floor-wall corner, floor trap, toilet base and pipe entriesNo, or a single row at mostDamp shows on the wall outside or around one pipe
Flexible cementitious coat under new tilesBathrooms being redone, and hollow or broken floorsYes, floor and lower wallsThe bed is wet or the tiles have lost their bond
Sunken slab treatmentOlder bathrooms with a sunken slab filled with debris that holds waterYesThe ceiling below stays damp even after re-grouting
Integral waterproofing in screed and plasterNew bathrooms while the house is builtNot applicableEvery new bathroom we build, together with the coat

If the leak is from a supply pipe or a drain joint, we say so and fix the pipe first. No coating can stop a pipe that is leaking under pressure.

Bathroom leakage repair without removing tiles

Most bathroom leaks start at the joints, not through the tiles. Cement grout wears and cracks, and cleaning acids open it further. We rake the old grout out to depth, clean and dry the joints, and fill them with epoxy grout, which does not absorb water. The floor-wall corner, the floor trap and every pipe collar are sealed at the same visit.

This works when the tiles are firmly bonded. If tapping shows hollow tiles, or the moisture meter shows the bed is soaked, sealing over it only hides the leak for a season. Then the quote covers lifting the floor and waterproofing the slab instead.

Bathroom leakage from the upper floor into the ceiling below

In flats and two-storey houses the first sign is often a damp ceiling under the bathroom. The water may come from the tile joints, the sunken slab, a drain joint or a hidden supply pipe, and each needs a different repair. We flood-test the floor and trap separately, pressure-test the supply lines and read the damp below, so we know which it is. In apartments we write down what we found for both owners.

Cutaway of a two-storey house marking the bathrooms and wet zones above living rooms
Wet zones above living rooms, where a bathroom leak shows first

Toilet and sunken slab waterproofing

Many older bathrooms in Tamil Nadu have a sunken slab: a recess filled with brick, debris and sand under the tiles, with the pipes running through it. Once water gets in, the filling holds it like a sponge for months, and re-grouting the top cannot dry it.

We lift the floor, empty and dry the sunken portion, seal the pipe sleeves and lay a flexible coat over the slab and up the walls. The fill is replaced with waterproofed concrete, and the bathroom is flood-tested before the new tiles go down.

Bathroom waterproofing before tiling, in new bathrooms

The best time to waterproof a bathroom is after the plumbing is pressure-tested and before the screed and tiles. The floor is sloped to the trap, the corners get a fillet, and the flexible coat covers the floor and runs up the walls, to full height in the shower zone. We flood-test it, then lay the screed, the tiles and epoxy joints. Building with us? Our house construction page shows how every wet area is waterproofed as it is built.

Materials

The products we use in bathrooms

Fosroc and Sika coats, polymer for the screed, and Berger adhesive and epoxy grout. We supply them too, so you can see each one.

See all productsCompare the waterproofing methods

How the job runs

How our bathroom waterproofing works

  1. Leak trace

    An engineer checks the joints, trap, pipes and the ceiling below, and tests the floor and the supply lines separately.

  2. One method, in writing

    You get the repair, the products and what will be removed, if anything, before work starts.

  3. Preparation

    Old grout is raked out, or the tiles and wet fill are removed and the slab dried.

  4. Details first

    Corners, the floor trap, the toilet base and pipe collars are sealed before the main coat or grout.

  5. The waterproofing

    Epoxy grout in the joints, or a flexible coat on the floor and walls at the thickness the maker specifies.

  6. Flood test and handover

    We hold water on the floor, check the ceiling and walls below, and only then hand the bathroom back.

Our guarantee

A written guarantee with every bathroom

Every bathroom we waterproof is flood-tested before handover, and you get a written guarantee. How long it runs depends on the method, and it is stated in your quote with what it covers.

If water comes through a bathroom we have treated within that time, we come back, find out why and put it right.

Why choose RPC Constructions

  • Engineer-led inspection

    The leak is traced to its source before anything is suggested, free of charge.

  • Our own crews

    The people who quote the job do the job. No subcontractors on your site.

  • One method, in writing

    The system, the products and the area they cover, named before work starts.

  • Products we supply

    Fosroc, Sika, CCI and Berger, stored and mixed as their makers specify.

  • Tested before handover

    Terraces are pond-tested, tanks filled and wet areas flooded before we leave.

  • Three towns

    A head office in Erode and teams in Coimbatore and Krishnagiri.

Questions

Bathroom waterproofing: your questions

Not answered here? Call +91 99423 54602 or send a photo on WhatsApp.

How much does bathroom waterproofing cost?

It depends on whether the tiles can stay, the size of the bathroom and the state of the slab below. We inspect free of charge and give you one fixed price for your bathroom in writing before any work starts.

Can bathroom leakage be repaired without removing tiles?

Yes, when the tiles are well bonded and the leak is at the joints, corners or pipe collars. We replace the grout with epoxy and seal those points. If the tiles are hollow or the bed is soaked, the floor has to come up, and we tell you that before we start.

Which waterproofing is best for a bathroom?

Under the tiles, a flexible cementitious coat, because it bonds to the slab and moves with small cracks. Epoxy grout is not a waterproofing layer, but it keeps water out of the joints, so a full job uses both.

Should bathroom waterproofing be done before or after plastering and tiling?

After the plumbing is fixed and pressure-tested and the walls are plastered, and before the screed and tiles. That way the coat covers the whole floor and runs up the walls without gaps.

How do I find where my bathroom is leaking from?

Note when the damp below gets worse. A patch that is wet all the time points to a supply pipe; damp after use points to the joints, trap or slab. Our inspection tests each one separately.

How long will the bathroom be out of use?

A re-grout and seal usually needs a day or two, so the epoxy can cure. A full redo takes longer, and we give you the dates in the quote.

How long does bathroom waterproofing last, and is there a guarantee?

A properly laid coat under the tiles lasts as long as the floor, and epoxy joints last far longer than cement grout. You get a written guarantee, and its length for your method is stated in the quote.

Do you waterproof kitchens and utility areas too?

Yes. Kitchen sinks, utility and wash areas get the same methods and the same water test as a bathroom.

Near you

Bathroom waterproofing in Erode, Coimbatore and Krishnagiri

Our head office in Erode and our branch teams take on this work in and around each town. Open your town for its local services, products and areas.

Book a free bathroom waterproofing inspection.

  1. Send a photo or call

    A photo of the damp patch or crack on WhatsApp is enough to start.

  2. An engineer visits

    Free of charge. We find where the water gets in before we suggest anything.

  3. One method, one price

    The system, the products and the price in writing, before work starts.

+91 99423 54602contact@rpcconstructions.comMon – Sat · 08:30 – 18:30 IST