Waterproofing services
External wall waterproofing
External wall waterproofing from RPC Constructions stops rain soaking through your outer walls and showing up inside as seepage, damp patches and peeling paint. We fill the cracks, repair hollow plaster, seal the window and sunshade joints, and finish the exterior wall with a flexible waterproof coating named in your quote.
Wind-driven rain is the cause in most homes we see. Erode and Coimbatore get their main rains from October to December, with drizzle in Coimbatore from June, and Krishnagiri and Hosur get the south-west monsoon after the April and May storms. The treatment is the same; the timing is planned around your town's dry months.

- Freeinspection of the walls inside and out
- Cracks firstevery crack opened and filled before the coat
- Own crewsno subcontractors on your walls
Know the signs
Signs your external walls need waterproofing
If the damp inside gets worse after rain and fades in the dry months, the water is coming through the outer wall.
Damp patches after rain
Dark patches on the inside face of outer walls that appear in the rains, often under windows or at corners.
Peeling paint and white salts
Paint that blisters or flakes, with a white powder behind it, shows water passing through the wall.
Hairline cracks in the plaster
Fine cracks on the outer face, often in a map pattern, let rain into the plaster and the blockwork.
Damp around windows
Wet patches at the corners of windows and below sills, where the frame meets the wall.
Black streaks and algae
Dark staining on the outer face shows walls that stay wet for long after rain.
Hollow or loose plaster
Plaster that sounds hollow when tapped has lost its bond and holds water behind it.
Methods
External wall waterproofing methods
Most walls need a mix of these. We inspect the wall first and name each treatment and product in the quote.
| Treatment | Best for | On a painted wall? | Notes |
|---|---|---|---|
| Crack filling and joint sealing | Hairline and plaster cracks, wall-to-frame and wall-to-beam joints | Yes, after the cracks are opened | Always done before any coat |
| Flexible elastomeric coating | Walls that take driving rain | Yes, over sound paint once cleaned and primed | Stretches over fine cracks and keeps rain out |
| Plaster repair with waterproofed mortar | Hollow, cracked or crumbling plaster | The failed area is replaced | Bonded with polymer and waterproofed with an admixture |
| Window, sill and sunshade sealing | Damp around frames, sills and chajjas | Yes | Sealant joint around the frame and a drip edge below |
| Water-repellent treatment | Exposed brick, stone and textured walls | For unpainted surfaces | Keeps the look of the wall and lets it breathe |
Paint alone is not waterproofing. Even a good exterior paint cracks with the wall; the coating has to stretch.
Wall seepage treatment: stopping damp walls from rain
Wall seepage starts outside. Rain finds a crack, an open joint around a window or a patch of hollow plaster, soaks into the blockwork and dries out on the inside face, leaving damp patches, salts and peeling paint. Repainting the inside only hides it until the next monsoon.
We start by mapping the damp inside and matching it to the outer face. Then the cracks and joints are opened and filled, the failed plaster is replaced, and the whole elevation is coated. The inside is repaired and repainted only once the wall has dried.
- Damp mapped inside with a moisture meter
- Cracks, joints and window frames sealed outside
- Hollow plaster replaced
- Flexible coat over the whole wall, not only the patch
Exterior wall waterproofing coating: paint or elastomeric?
Ordinary exterior emulsion is a decorative coat; it resists a shower but cracks when the wall moves with the heat. An elastomeric waterproof coating is thicker and stretches, so it bridges hairline cracks and keeps out wind-driven rain. On walls that face the monsoon, we use the elastomeric system and can finish it in the colour you choose.
External wall crack filling
Hairline and plaster cracks are opened into a V, cleaned, and filled with a polymer-modified mortar or a flexible sealant before the coat goes on. Wide, active or structural cracks need more than filling; our crack and leakage treatment page explains how we assess and repair them.

Parapet wall and sunshade (chajja) waterproofing
Parapet tops and sunshades take rain from above and send it into the wall below if they have no slope or drip. We slope and coat the top of the parapet and the sunshade, cut a drip groove under the edge, and seal the joint where the sunshade meets the wall.
Damp low down on a wall that rises from the ground is a different problem, rising damp, which we treat on our crack and leakage treatment page.
Materials
The products we use on external walls
Integral waterproofing and polymer bonding agents from Fosroc and CCI for crack and plaster repair, Renacon ready-mix plaster, and a flexible Fosroc coat for sills and sunshades. The finish coat is named in your quote.
-
Fosroc
Fosroc Conplast WL Xtra
Reduces permeability of concrete and mortar
-
Fosroc
Fosroc Nitobond SBR
Bonding, polymer-modified mortar and waterproof screeds
-
CCI
CCI Neo Bond SBR
Bonding, polymer-modified mortar and waterproof screeds
-
Fosroc
Fosroc Rendroc CS White
Concrete surface repair/finishing
-
Renacon
Renacon Renaplast Ready-mix Plaster
Factory-made plaster for masonry/concrete
-
Fosroc
Fosroc Brushbond RFX Grey
Two-component flexible waterproof barrier
How the job runs
How our external wall waterproofing works
Inspection inside and out
An engineer maps the damp inside, checks the outer face, windows and sunshades, and taps the plaster.
One method, in writing
You get the treatments, the products, the wall area and the colour before work starts.
Access and cleaning
Scaffolding goes up; the wall is cleaned of dirt, algae and loose paint.
Cracks, joints and plaster
Cracks are opened and filled, hollow plaster is replaced, and window and sunshade joints are sealed.
Primer and waterproof coats
Primer, then the coating in the coats and thickness the maker specifies, over the whole elevation.
Check and handover
We check the inside faces once the wall has dried, then repair and repaint inside if that is part of the job.
From our sites
External wall waterproofing, before and after

Before: cracks and damp patches after the rains 
After: cracks filled and one flexible coat 
Plaster repaired with waterproofed mortar before the coat
Our guarantee
A written guarantee with every wall
Every wall we waterproof comes with a written guarantee. How long it runs depends on the coating system, and it is stated in your quote together with what it covers.
If rain comes through a wall we have treated within that time, we come back, find out why and put it right.
Why choose RPC Constructions
Engineer-led inspection
The leak is traced to its source before anything is suggested, free of charge.
Our own crews
The people who quote the job do the job. No subcontractors on your site.
One method, in writing
The system, the products and the area they cover, named before work starts.
Products we supply
Fosroc, Sika, CCI and Berger, stored and mixed as their makers specify.
Tested before handover
Terraces are pond-tested, tanks filled and wet areas flooded before we leave.
Three towns
A head office in Erode and teams in Coimbatore and Krishnagiri.
Questions
External wall waterproofing: your questions
Not answered here? Call +91 99423 54602 or send a photo on WhatsApp.
How much does external wall waterproofing cost?
It depends on the wall area, its height and access, the number of cracks and the coating chosen. After a free look at your walls we send one fixed price in writing, scaffolding included, before work starts.
Why do my inside walls get damp in the rainy season?
Because rain is getting through the outer wall: through cracks, open joints around windows, or hollow plaster. It soaks the blockwork and dries out on the inside face. Fixing the outside stops it; repainting the inside does not.
Is waterproof exterior paint enough?
On sheltered walls with no cracks, sometimes. On walls that face the monsoon, an elastomeric coating is needed, because it stretches over fine cracks where paint splits. We tell you which your walls need after the inspection.
Can external wall waterproofing be done on a painted wall?
Yes, if the paint is sound. We clean it, remove any loose paint, fill the cracks, prime and coat over it. Flaking or chalky paint is scraped back first so the coat can bond.
How long does exterior wall waterproofing last?
A good elastomeric system lasts several times longer than ordinary exterior paint, depending on the product, the thickness and the exposure. Walls facing the sea or the monsoon wear faster. Your quote states the guarantee for the system chosen.
When is the best time to waterproof external walls?
In the dry months before your monsoon: January to September in Erode, and January to March in Krishnagiri and Hosur, before the April and May storms. In Coimbatore, the drier spells between the two monsoons work best. The wall must be dry for the coat to bond.
Do you waterproof apartment blocks and tall walls?
Yes. We work from scaffolding and plan the work elevation by elevation, so residents can stay in their flats.
Near you
External wall waterproofing in Erode, Coimbatore and Krishnagiri
Our head office in Erode and our branch teams take on this work in and around each town. Open your town for its local services, products and areas.
Book a free external wall waterproofing inspection.
Send a photo or call
A photo of the damp patch or crack on WhatsApp is enough to start.
An engineer visits
Free of charge. We find where the water gets in before we suggest anything.
One method, one price
The system, the products and the price in writing, before work starts.
+91 99423 54602contact@rpcconstructions.comMon – Sat · 08:30 – 18:30 IST









